5000mAh 3S 60C/120C LiPo RC Battery
Built around a 11.1V 3S1P platform, this 5000mah 3s 60c 120c lipo rc battery combines 5000mAh capacity with 60C/120C output. The selection focus is a slim 3S format for RC platforms where an 11.1V system and lower pack height are required. Before ordering, confirm voltage compatibility, continuous and peak current demand, battery-bay dimensions, allowable weight and connector against the target RC or FPV platform.
Voltage: 11.1V
·Configuration: 3S1P
·Capacity: 5000mAh
·Discharge Rate: 60C/120C
·Energy: TBD
·Weight: 226g
·Dimensions: 134 × 43 × 17mm
·Connector: XT60 / XT30 / customization
5000mAh 3S1P Battery Overview
The 5000mAh 3S 60C/120C LiPo RC Battery uses 11.1V, 3S1P, 5000mAh and 60C/120C; its published physical data are 226g and 134 × 43 × 17mm. These values define the starting point for fit and electrical compatibility, not a guarantee that the pack suits every model.
The product is positioned around a slim 3S format for RC platforms where an 11.1V system and lower pack height are required. Buyers should compare the pack with the equipment manual, ESC and motor limits, battery tray, connector, center-of-gravity requirement and expected load profile. Typical application directions include 3S RC Racing Builds, Compact RC Platforms, Compatible Model Aircraft.
Compatibility and Selection Notes
Confirm five items before ordering this pack: the platform must support 11.1V; its current demand must remain within the confirmed discharge specification; the battery bay must accept 134 × 43 × 17mm; the system must tolerate 226g; and the installed connector must match XT60 / XT30 / customization. Also check cable direction, polarity and balance-lead access. Where a field is marked TBD, request the drawing or a sample before approving production.
5000mAh 3S1P Key Specifications
Applications for 3S RC Racing Builds
3S RC Racing Builds
3S RC Racing Builds can be considered where the platform supports 11.1V and the pack fits the available space and weight budget. The published 5000mAh capacity and 60C/120C rating help define the electrical envelope, but final suitability still depends on actual current demand and the equipment manufacturer's limits.
Compact RC Platforms
For Compact RC Platforms, check the effect of 226g pack weight and 134 × 43 × 17mm dimensions on installation, balance and handling. Use the product specification to shortlist the pack, then confirm connector, cable routing and expected load before a sample test.
Compatible Model Aircraft
Compatible Model Aircraft require a measured approach: verify voltage, battery-bay dimensions, connector and continuous/peak current first. A sample evaluation under the real duty cycle is more reliable than assuming that capacity or C-rate alone will deliver a specific operating time.
