7000mAh 6S 120C RC Battery Pack
Built around a 22.2V 6S1P platform, this 7000mah 6s 120c rc battery pack combines capacity with 60C/120C shown in table output. The selection focus is a 6S RC pack concept for racing and model aircraft after capacity and discharge labels are reconciled. Before ordering, confirm voltage compatibility, continuous and peak current demand, battery-bay dimensions, allowable weight and connector against the target RC or FPV platform.
Voltage: 22.2V
·Configuration: 6S1P
·Capacity: 7000mAh
·Discharge Rate: 120C
·Energy: 155.4Wh
·Weight: 805g
·Dimensions: 155 × 47 × 60mm
·Connector: XT60 / XT90 / customization
6S1P Battery Overview
The 7000mAh 6S 120C RC Battery Pack uses 22.2V, 6S1P, and 60C/120C shown in table; its published physical data are 805g and 155 × 47 × 60mm. These values define the starting point for fit and electrical compatibility, not a guarantee that the pack suits every model.
The product is positioned around a 6S RC pack concept for racing and model aircraft after capacity and discharge labels are reconciled. Buyers should compare the pack with the equipment manual, ESC and motor limits, battery tray, connector, center-of-gravity requirement and expected load profile. Typical application directions include RC Racing Platforms, Model Aircraft, Custom 6S Power Systems.
Compatibility and Selection Notes
Confirm five items before ordering this pack: the platform must support 22.2V; its current demand must remain within the confirmed discharge specification; the battery bay must accept 155 × 47 × 60mm; the system must tolerate 805g; and the installed connector must match XT60 / XT90 / customization. Also check cable direction, polarity and balance-lead access. Where a field is marked TBD, request the drawing or a sample before approving production.
6S1P Key Specifications
Applications for RC Racing Platforms
RC Racing Platforms
RC Racing Platforms can be considered where the platform supports 22.2V and the pack fits the available space and weight budget. The published capacity and 60C/120C shown in table rating help define the electrical envelope, but final suitability still depends on actual current demand and the equipment manufacturer's limits.
Model Aircraft
For Model Aircraft, check the effect of 805g pack weight and 155 × 47 × 60mm dimensions on installation, balance and handling. Use the product specification to shortlist the pack, then confirm connector, cable routing and expected load before a sample test.
Custom 6S Power Systems
Custom 6S Power Systems require a measured approach: verify voltage, battery-bay dimensions, connector and continuous/peak current first. A sample evaluation under the real duty cycle is more reliable than assuming that capacity or C-rate alone will deliver a specific operating time.
