1300mAh 6S 120C FPV Drone Battery
Built around a 22.2V 6S1P platform, this 1300mah 6s 120c fpv drone battery combines 1300mAh capacity with 120C output. The selection focus is fast throttle response with a compact, lightweight pack format. Before ordering, confirm voltage compatibility, continuous and peak current demand, battery-bay dimensions, allowable weight and connector against the target RC or FPV platform.
Voltage: 22.2V
·Configuration: 6S1P
·Capacity: 1300mAh
·Discharge Rate: 120C
·Energy: 29.8Wh
·Weight: approx. 230g
·Dimensions: 70 × 35mm shown in the product image; full L × W × H requires confirmation
·Connector: XT60
1300mAh 6S1P Battery Overview
The 1300mAh 6S 120C FPV Drone Battery uses 22.2V, 6S1P, 1300mAh and 120C; its published physical data are approx. 230g and 70 × 35mm shown in the product image; full L × W × H requires confirmation. These values define the starting point for fit and electrical compatibility, not a guarantee that the pack suits every model.
The product is positioned around fast throttle response with a compact, lightweight pack format. Buyers should compare the pack with the equipment manual, ESC and motor limits, battery tray, connector, center-of-gravity requirement and expected load profile. Typical application directions include 5-Inch FPV Racing Builds, Freestyle FPV Platforms, FPV Training and Test Builds.
Compatibility and Selection Notes
Confirm five items before ordering this pack: the platform must support 22.2V; its current demand must remain within the confirmed discharge specification; the battery bay must accept 70 × 35mm shown in the product image; full L × W × H requires confirmation; the system must tolerate approx. 230g; and the installed connector must match XT60. Also check cable direction, polarity and balance-lead access. Where a field is marked TBD, request the drawing or a sample before approving production.
1300mAh 6S1P Key Specifications
Applications for 5-Inch FPV Racing Builds
5-Inch FPV Racing Builds
5-Inch FPV Racing Builds can be considered where the platform supports 22.2V and the pack fits the available space and weight budget. The published 1300mAh capacity and 120C rating help define the electrical envelope, but final suitability still depends on actual current demand and the equipment manufacturer's limits.
Freestyle FPV Platforms
For Freestyle FPV Platforms, check the effect of approx. 230g pack weight and 70 × 35mm shown in the product image; full L × W × H requires confirmation dimensions on installation, balance and handling. Use the product specification to shortlist the pack, then confirm connector, cable routing and expected load before a sample test.
FPV Training and Test Builds
FPV Training and Test Builds require a measured approach: verify voltage, battery-bay dimensions, connector and continuous/peak current first. A sample evaluation under the real duty cycle is more reliable than assuming that capacity or C-rate alone will deliver a specific operating time.
