1800mAh 6S 100C FPV Battery Pack
Built around a 22.2V 6S1P platform, this 1800mah 6s 100c fpv battery pack combines 1800mAh capacity with 100C output. The selection focus is a larger energy reserve than lighter racing packs while retaining a 6S FPV power platform. Before ordering, confirm voltage compatibility, continuous and peak current demand, battery-bay dimensions, allowable weight and connector against the target RC or FPV platform.
Voltage: 22.2V
·Configuration: 6S1P
·Capacity: 1800mAh
·Discharge Rate: 100C
·Energy: 40.0Wh
·Weight: approx. 273g
·Dimensions: TBD
·Connector: XT60
1800mAh 6S1P Battery Overview
The 1800mAh 6S 100C FPV Battery Pack uses 22.2V, 6S1P, 1800mAh and 100C; its published physical data are approx. 273g and TBD. These values define the starting point for fit and electrical compatibility, not a guarantee that the pack suits every model.
The product is positioned around a larger energy reserve than lighter racing packs while retaining a 6S FPV power platform. Buyers should compare the pack with the equipment manual, ESC and motor limits, battery tray, connector, center-of-gravity requirement and expected load profile. Typical application directions include Freestyle FPV Builds, 5-Inch Multirotors, Longer Practice and Test Sessions.
Compatibility and Selection Notes
Confirm five items before ordering this pack: the platform must support 22.2V; its current demand must remain within the confirmed discharge specification; the battery bay must accept TBD; the system must tolerate approx. 273g; and the installed connector must match XT60. Also check cable direction, polarity and balance-lead access. Where a field is marked TBD, request the drawing or a sample before approving production.
1800mAh 6S1P Key Specifications
Applications for Freestyle FPV Builds
Freestyle FPV Builds
Freestyle FPV Builds can be considered where the platform supports 22.2V and the pack fits the available space and weight budget. The published 1800mAh capacity and 100C rating help define the electrical envelope, but final suitability still depends on actual current demand and the equipment manufacturer's limits.
5-Inch Multirotors
For 5-Inch Multirotors, check the effect of approx. 273g pack weight and TBD dimensions on installation, balance and handling. Use the product specification to shortlist the pack, then confirm connector, cable routing and expected load before a sample test.
Longer Practice and Test Sessions
Longer Practice and Test Sessions require a measured approach: verify voltage, battery-bay dimensions, connector and continuous/peak current first. A sample evaluation under the real duty cycle is more reliable than assuming that capacity or C-rate alone will deliver a specific operating time.
