Agricultural Drone Battery Pack for Spraying UAVs
agricultural drone battery pack is planned around the aircraft rather than a fixed universal specification. The pack configuration should be defined from the platform voltage, propulsion current, payload, target operating time, available battery bay, weight limit and connector. This page is intended to help spraying, camera or survey UAV teams prepare those inputs before requesting a battery recommendation.
Voltage: Project-specific
·Configuration: Project-specific
·Capacity: Project-specific
·Discharge Rate: Set from continuous and peak current demand
·Energy: Calculated after voltage and capacity confirmation
·Weight: Target weight required
·Dimensions: Available battery bay required
·Connector: Platform connector required
Agricultural Drone Battery Pack Overview
agricultural drone battery selection starts with the aircraft's real mission profile. Payload, propulsion load, operating pattern and reserve requirement determine how much energy the pack must provide, while the battery bay, take-off-weight limit and connector determine whether the design can be integrated safely. A capacity figure alone cannot establish flight time or suitability.
For Crop-Spraying UAVs, Plant-Protection Drones, Agricultural UAV Replacement Projects, the practical next step is to provide the nominal voltage, continuous and peak current, target operating time, payload, available dimensions, maximum battery weight, connector and expected order quantity. Yattox can then evaluate a project-specific voltage, capacity and pack arrangement without presenting an unverified universal specification. Typical application directions include Crop-Spraying UAVs, Plant-Protection Drones, Agricultural UAV Replacement Projects.
Compatibility and Selection Notes
Send the aircraft nominal voltage and full-charge limit, continuous and peak current, target operating time, payload, battery compartment dimensions, maximum battery weight, connector and charging interface. These values allow the pack configuration to be reviewed as one system. If any value is unknown, mark it as TBD rather than copying a specification from another UAV.
Battery Requirements and Project Specifications
This is a project-defined battery page, so the specification area should not display a single invented voltage, capacity or discharge rating. Replace the placeholders only after the target UAV data have been received. Required inputs are nominal/full-charge voltage, continuous and peak current, usable-energy or operating-time target, battery-bay dimensions, maximum pack weight, connector, charging method and environmental conditions.
Applications for Crop-Spraying UAVs and Related Platforms
Crop-Spraying UAVs
Crop-Spraying UAVs should be evaluated from mission duration, payload, propulsion current and reserve margin. The battery proposal must also fit the available compartment and weight allowance. This application heading describes the decision process; it does not promise a fixed flight time or universal compatibility.
Plant-Protection Drones
Plant-Protection Drones should be evaluated from mission duration, payload, propulsion current and reserve margin. The battery proposal must also fit the available compartment and weight allowance. This application heading describes the decision process; it does not promise a fixed flight time or universal compatibility.
Agricultural UAV Replacement Projects
Agricultural UAV Replacement Projects should be evaluated from mission duration, payload, propulsion current and reserve margin. The battery proposal must also fit the available compartment and weight allowance. This application heading describes the decision process; it does not promise a fixed flight time or universal compatibility.
Agricultural Drone Battery Pack FAQs
What electrical platform does the Agricultural Drone product use?
How should buyers interpret the capacity and discharge data on this Project-specific battery?
What must be checked before fitting this battery into Crop-Spraying UAVs?
Which connector information is available for the Agricultural Drone battery?
Can this Agricultural Drone pack be used in every Plant-Protection Drones setup?
What information should be included when requesting a quote for Agricultural Drone Battery Pack for Spraying UAVs?
Related Products
6S 29500mAh 22.2V LiPo Battery
Rated at 22.2V and 654.9Wh, this 6S 29,500mAh LiPo battery features a 1,512g specified pack weight and an XT90 connector. Evaluate its energy requirement, mounting space and charging arrangement before ordering.
·Configuration: 6S
·Nominal Voltage: 22.2V
·Capacity: 29,500mAh
·Nominal Energy: 654.9Wh
·Discharge Rate: 10C (label rating)
·Net Weight: 1,512g
·Dimensions: 187 × 65 × 77mm
·Main Connector: XT90
6S 24500mAh 22.2V LiPo Battery
A 24.5Ah UAV LiPo battery with 543.9Wh of nominal stored energy, built on a 6S 22.2V platform and marked 10C. Compare the pack against your aircraft’s energy demand and physical integration requirements before selecting it.
·Configuration: 6S
·Nominal Voltage: 22.2V
·Capacity: 24,500mAh
·Nominal Energy: 543.9Wh
·Discharge Rate: 10C (label rating)
6S 22000mAh 22.2V LiPo Battery
The YATTOX 6S 22000mAh UAV LiPo battery provides 488.4Wh of nominal energy at 22.2V, with a 10C label rating. Its listed 1,542g weight, 187 × 77 × 55mm dimensions and XT60 connector are key considerations when evaluating the aircraft’s energy demand, installed mass and wiring compatibility.
·Configuration: 6S
·Nominal Voltage: 22.2V
·Capacity: 22,000mAh
·Nominal Energy: 488.4Wh
·Discharge Rate: 10C (label rating)
·Pack Weight: 1,542g
·Main Connector: XT60
