6S 33000mAh 22.2V LiPo Battery
Rated at 22.2V with 732.6Wh of nominal energy, this 6S 33,000mAh LiPo battery carries a labeled 10C discharge rating. Confirm charging, current and installation requirements against your aircraft before ordering.
·Configuration: 6S
·Nominal Voltage: 22.2V
·Capacity: 33,000mAh (33Ah)
·Nominal Energy: 732.6Wh
·Discharge Rate: 10C (label rating)
732.6Wh and the 33Ah High-Capacity Pack
732.6Wh and the 33Ah High-Capacity Pack
For 6S aircraft projects, 732.6Wh is the nominal energy figure to compare against the planned mission demand. A complete selection also accounts for installed battery mass, permitted takeoff weight, discharge requirements and the pack space available inside the aircraft.
Compare Nominal Energy to Mission Demand
Use the 732.6Wh nominal rating as a starting point, then apply the mission power profile, allowable depth of discharge and reserve policy. Nominal stored energy is not a guaranteed usable output under every flight condition.
Confirm Weight and Installation Limits
The exact pack weight and dimensions have not been confirmed for this model. Obtain the latest specification before finalizing takeoff-mass, balance and mounting-space calculations. A higher capacity figure alone does not establish longer flight time.
6S 33000mAh LiPo Battery Specifications
The confirmed specification is 22.2V, 33,000mAh (33Ah) and 732.6Wh nominal energy, with a 10C discharge marking. Fields not yet confirmed are listed as such and must not be treated as verified values.
Installation and Integration Considerations
Before integrating a 33Ah pack, confirm the aircrafts usable mounting space, mass limits, cable routing and connector access against the final battery specification.
Check Space and Center of Gravity
The exact dimensions and weight of this 33Ah model are not yet confirmed. Request the latest drawing and mass data, then verify support surfaces, vibration restraint, cable bend radius and installed balance using the complete aircraft configuration.
Verify Connector and Wiring
The connector model, polarity and wire gauge have not been confirmed. Do not assume compatibility from product images alone; verify the mating part and cable arrangement before installation.
Charging and Discharge Checks for the 33Ah LiPo Pack
Match the aircrafts sustained and peak current demand with the packs confirmed discharge specification. For charging, ensure the charger supports the 6S LiPo profile and approved settings.
Continuous and Peak Demand
Record propulsion and auxiliary current under representative flight phases rather than relying only on a summed motor peak figure. The 10C marking is a labeled rate; verified continuous and peak current capability must be confirmed by the manufacturer.
Select a Compatible 6S LiPo Charger
Confirm the charger supports the correct 6S cell count and LiPo chemistry, the balance connection and the manufacturers specified charge-current limit. The maximum charge rate for this model has not been provided and must be confirmed before setting a charge current.
30Ah or 33Ah: What Actually Changes?
Compare the confirmed figures below before choosing a capacity. Weight, connector and charge/discharge limits for the 33Ah model remain to be confirmed.
The 33Ah pack carries 66.6Wh more nominal energy than the 30Ah model. Because the 33Ah weight, connector and verified current limits are not yet confirmed, a capacity-only comparison would omit important integration details.
Verify the 33Ah Configuration Before Ordering
For a technical review, provide the aircrafts electrical load profile, maximum battery mass, mounting dimensions, wiring arrangement and charging setup.
Electrical Inputs
Include the planned duty cycle, mission reserve target, operating and peak current, electrical interface and charging system. State whether the required figure is nominal or usable energy so the comparison is made on a consistent basis.
Mechanical and Ordering Inputs
Provide installation-space drawings, orientation constraints, handling requirements, sample quantity and estimated purchase volume. Request the latest dimensional and electrical specification before approving installation or volume procurement.
6S 33000mAh Battery FAQs
These answers address the confirmed specifications, the 10C calculation and the integration checks to complete before ordering.
How much energy does a 6S 33,000mAh LiPo battery provide?
At a nominal voltage of 22.2V, a 33,000mAh (33Ah) pack provides 732.6Wh of nominal energy (22.2V x 33Ah). Actual usable energy depends on discharge limits, operating conditions and battery condition.
What does a 10C discharge rating mean for a 33Ah battery?
A 10C rating is a discharge-rate value relative to nominal capacity. Multiplying 33Ah by 10C gives a theoretical current of 330A. This calculation alone does not establish a verified continuous or peak current capability.
Does a 10C rating mean the battery can continuously deliver 330A?
Not necessarily. The 330A figure is calculated from nominal capacity and the labeled discharge rate. Continuous and burst discharge capability require separate manufacturer specifications or test data.
What charging specifications should I check for a 6S LiPo battery?
Check that the charger supports 6S lithium polymer batteries, the appropriate charging voltage and the manufacturers specified charging current. Balance-charging compatibility should also be verified; the maximum charge rate for this model is not yet confirmed.
How do I check connector compatibility?
Check the connector model, polarity, wiring arrangement and equipment-side connection. Do not assume compatibility based on connector appearance alone; the connector model for this pack is not yet confirmed.
Can a 33,000mAh LiPo battery fit my industrial drone?
Compatibility depends on the aircrafts supported voltage, current requirements, available installation space, battery weight and payload capacity. Confirm the 33Ah packs dimensions, weight and connector before selecting a power source.
Explore Related 6S Options
Review the neighboring 29.5Ah and 30Ah options when balancing nominal energy, installed mass and interface requirements.
Explore the YATTOX UAV Battery Range for the full 6S selection.
Discuss Your UAV Power Requirements with YATTOX
Send your aircraft voltage, capacity, current and installation requirements to evaluate a suitable 6S power configuration.
Provide voltage, capacity, operating and peak current, installation space and connector requirements for a configuration discussion.
Related Products
6S 39000mAh 22.2V LiPo Battery
The YATTOX 6S 39,000mAh lithium polymer battery provides a 22.2V nominal platform with 865.8Wh of rated energy. Review its capacity, physical fit and electrical requirements when evaluating a battery configuration for your UAV project.
·Configuration: 6S
·Nominal Voltage: 22.2V
·Capacity: 39,000mAh (39Ah)
·Rated Energy: 865.8Wh
·Discharge Rate: 10C (label rating)
6S 36000mAh 22.2V LiPo Battery
Rated at 22.2V with 799.2Wh of nominal energy, this 6S 36,000mAh lithium polymer battery carries a labeled 10C discharge rate. It is designed for UAV power applications where capacity, voltage and system compatibility must be evaluated together.
·Configuration: 6S
·Nominal Voltage: 22.2V
·Capacity: 36,000mAh (36Ah)
·Rated Energy: 799.2Wh
·Discharge Rate: 10C (label rating)
6S 29500mAh 22.2V LiPo Battery
Rated at 22.2V and 654.9Wh, this 6S 29,500mAh LiPo battery features a 1,512g specified pack weight and an XT90 connector. Evaluate its energy requirement, mounting space and charging arrangement before ordering.
·Configuration: 6S
·Nominal Voltage: 22.2V
·Capacity: 29,500mAh
·Nominal Energy: 654.9Wh
·Discharge Rate: 10C (label rating)
·Net Weight: 1,512g
·Dimensions: 187 × 65 × 77mm
·Main Connector: XT90
