6S 39000mAh 22.2V LiPo Battery
The YATTOX 6S 39,000mAh lithium polymer battery provides a 22.2V nominal platform with 865.8Wh of rated energy. Review its capacity, physical fit and electrical requirements when evaluating a battery configuration for your UAV project.
·Configuration: 6S
·Nominal Voltage: 22.2V
·Capacity: 39,000mAh (39Ah)
·Rated Energy: 865.8Wh
·Discharge Rate: 10C (label rating)
39Ah LiPo Battery for UAV Energy and Payload Planning
A 39Ah LiPo Battery for UAV Power System Planning
With a nominal capacity of 39Ah, this 6S lithium polymer battery is an option for UAV platforms that require a higher-capacity power source. Its 22.2V nominal voltage and 865.8Wh rated energy provide the starting specifications for system-level evaluation.
Evaluate the Complete Battery Configuration
Capacity is only one part of battery selection. The battery mass and dimensions must also fit the aircraft weight allowance, payload plan and installation space. Reviewing these factors together helps determine whether this configuration is appropriate.
Plan at System Level
Use the stated electrical and mechanical specifications as a starting point, then confirm the final fit and electrical compatibility against the aircraft before volume procurement.
22.2V 6S LiPo Battery Specifications
The main electrical specifications of this 39,000mAh LiPo battery are listed below. Weight and dimensions are approximate reference values; check the final battery dimensions and mounting clearances when planning integration.
Battery Weight and UAV Payload Planning
A higher-capacity battery can increase the energy available onboard, but its mass also becomes part of the aircraft takeoff weight. The practical question is how the complete battery configuration fits the aircraft weight and payload limits.
Battery Mass in the Weight Budget
Include the battery, mounting hardware, cables and all mission equipment when calculating takeoff weight. Confirm the actual mass against the final production specification.
Payload Capacity and Battery Weight
Check how the selected battery affects the remaining allowance for cameras, sensors, spraying equipment or other payloads. The actual allowance depends on the airframe, propulsion system and maximum takeoff weight.
Energy Versus Battery Mass
Compare rated energy with mass as one part of system evaluation. A higher nominal energy figure does not by itself establish longer flight time. Do not treat a competitor energy-density figure as a specification of this LiPo product.
Aircraft-Level Validation
Confirm thrust margin, power consumption and operating reserve using the aircraft manufacturer data and representative tests.
Battery Installation Dimensions and Space Requirements
Before selecting a 39Ah battery, compare its physical envelope with the aircraft battery compartment and mounting arrangement. Check the available length, width and height, including clearance for cables and connectors.
Secure Mounting and Access
Confirm the battery can be restrained against movement and vibration without interfering with nearby components. The mounting method should allow practical access for installation, removal and inspection.
Custom Platform Integration
For custom UAV platforms, evaluate the battery together with the tray, straps, wiring route and center-of-gravity requirements. Use the final production dimensions when checking installation fit.
10C Discharge Rate and Electrical Compatibility
The 10C label is one of the listed electrical specifications, but it should be assessed together with the documented discharge limits and the UAV actual current demand.
Voltage Range and System Compatibility
Check that the UAV power system supports a 6S configuration and its operating voltage range. Nominal voltage alone is not a complete compatibility check.
Connector, Polarity and Wiring
Verify connector type, polarity, wire arrangement and mating compatibility before installation. Do not select a connector based only on color or appearance.
Current Demand and Protection
Compare propulsion current demand with the documented discharge limits. The 10C label is not a verified continuous or peak current rating without supporting specifications. Review power distribution, wiring and protection devices as one electrical setup.
Charging a 6S Lithium Polymer Battery
Use a charger designed for lithium polymer batteries and compatible with a 6S cell configuration. Follow the battery manufacturer charging instructions and the charger operating guidance.
Check Before Charging
Verify the cell count, charging mode, balance lead connection and permitted charging current. Use the specified balance-charging procedure where required, and charge in a monitored area.
Do Not Infer From Capacity
Do not determine charging current or charging time from capacity alone. Follow the battery documented charging limits.
FAQ About the 6S 39,000mAh LiPo Battery
Answers focus on 39Ah versus 36Ah, payload, installation and the 10C rating.
How much energy does a 6S 39,000mAh LiPo battery provide?
It has a nominal energy rating of 865.8Wh, calculated from 22.2V x 39Ah. Actual usable energy depends on operating conditions and discharge limits.
What is the difference between a 39Ah and a 36Ah battery?
At 22.2V nominal, a 39Ah battery has a rated energy of 865.8Wh compared with 799.2Wh for a 36Ah battery. The 39Ah model provides 66.6Wh more nominal energy, but its mass and physical fit must also be considered.
Can a higher-capacity battery reduce the UAV available payload?
It can, if the selected battery increases takeoff weight. The remaining payload allowance depends on the aircraft maximum takeoff weight, propulsion system and complete equipment configuration.
How should I check whether this battery fits my UAV?
Compare the battery length, width and height with the available compartment. Also check cable clearance, mounting hardware, connector access and the aircraft center-of-gravity requirements.
Does the 10C rating mean a continuous discharge current of 390A?
No. Multiplying 39Ah by 10C gives a theoretical arithmetic result of 390A, but it does not establish the verified continuous or peak discharge capability. Those limits require product-specific discharge specifications or test data.
Does a 39Ah battery always provide longer flight time than a 36Ah battery?
Not necessarily. Flight time depends on usable energy, battery mass, aircraft efficiency, payload, flight profile, weather and operating reserve. Compare complete system performance rather than capacity alone.
Explore Related 6S Options
Compare nearby capacities when balancing nominal energy, installed mass and interface requirements.
Explore the YATTOX UAV Battery Range for the full 6S selection.
Discuss Your UAV Battery Integration Requirements
Selecting a battery for a UAV project involves more than matching capacity and voltage. Share your aircraft configuration, payload target, installation space and electrical requirements with YATTOX.
Provide voltage, capacity, operating current, payload target, installation space, connector requirements and project quantity for a configuration discussion.
Related Products
6S 36000mAh 22.2V LiPo Battery
Rated at 22.2V with 799.2Wh of nominal energy, this 6S 36,000mAh lithium polymer battery carries a labeled 10C discharge rate. It is designed for UAV power applications where capacity, voltage and system compatibility must be evaluated together.
·Configuration: 6S
·Nominal Voltage: 22.2V
·Capacity: 36,000mAh (36Ah)
·Rated Energy: 799.2Wh
·Discharge Rate: 10C (label rating)
6S 33000mAh 22.2V LiPo Battery
Rated at 22.2V with 732.6Wh of nominal energy, this 6S 33,000mAh LiPo battery carries a labeled 10C discharge rating. Confirm charging, current and installation requirements against your aircraft before ordering.
·Configuration: 6S
·Nominal Voltage: 22.2V
·Capacity: 33,000mAh (33Ah)
·Nominal Energy: 732.6Wh
·Discharge Rate: 10C (label rating)
6S 29500mAh 22.2V LiPo Battery
Rated at 22.2V and 654.9Wh, this 6S 29,500mAh LiPo battery features a 1,512g specified pack weight and an XT90 connector. Evaluate its energy requirement, mounting space and charging arrangement before ordering.
·Configuration: 6S
·Nominal Voltage: 22.2V
·Capacity: 29,500mAh
·Nominal Energy: 654.9Wh
·Discharge Rate: 10C (label rating)
·Net Weight: 1,512g
·Dimensions: 187 × 65 × 77mm
·Main Connector: XT90